"Server" {
	# This is a randomly generated id that clients will use to map their tool config settings to this server.
	S:"serverID"="7e9fc44f-fe6c-476a-bd04-aa87ec2991bb"

	# This can be used to limit the maximum speed boost allowed by the modular armor.
	# A value of for example 1 means a maximum boost of +100% over default character speed.
	# Set to -1 for no limit, Default: 16 (+1600%)
	D:"armorSpeedLimit"=16.0

	# Allows you to disable elytra flight supplied by DE's armor
	B:"enableElytraFlight"=true

	# Allows you to disable creative flight supplied by DE's armor
	B:"enableCreativeFlight"=true

	# Allows you to disable draconium ore generation in the End
	B:"enableOreEnd"=true

	# Allows you to disable draconium ore generation in the Overworld
	B:"enableOreOverworld"=true

	# Allows you to disable draconium ore generation in the Nether
	B:"enableOreNether"=true

	# Sets the maximum blink range for the Advanced Dislocator
	I:"dislocatorBlinkRange"=32

	# Sets the blinks to regular fuel ratio. Default 1 regular fuel (1 pearl) allows 4 blinks.
	I:"dislocatorBlinksPerPearl"=4

	# Sets how far fusion crafting injectors can be from the fusion crafting core
	I:"fusionInjectorRange"=16

	# Sets the minimum distance a fusion injector must be from the fusion crafting core.
	I:"fusionInjectorMinDist"=2

	# Time in ticks required for charging phase of fusion crafting with each injector tier. Draconium, Wyvern, Draconic, Chaotic
	I:"fusionChargeTime" <
		300
		220
		140
		60
	>

	# Time in ticks required for crafting phase of fusion crafting with each injector tier. Draconium, Wyvern, Draconic, Chaotic
	# The time selected is based on the lowest tier injector used in the craft.
	# Max value for any of these is 32,767 (27.3 minutes)
	I:"fusionCraftTime" <
		300
		220
		140
		60
	>

	# This is a list of entities that the "Projectile Immunity Cancellation" module will work on. Add additional entities as required. (Let me know if i missed any)
	S:"projectileAntiImmuneEntities" <
		minecraft:enderman
		minecraft:wither
		minecraft:ender_dragon
		draconicevolution:guardian_wither
	>

	# Config values related to the chaos guardian fight.
	# The default values of -99 are markers indicating the internal hard coded value should be used.
	# This allows these values to be updated between mod versions for balance adjustments. Setting them to anything other than -99 will override the internal values.
	"Guardian Fight" {
		# Sets the base shield strength for chaos guardian crystals.
		# Default: 512
		I:"guardianCrystalShield"=-99

		# Sets how long the guarian crystal's shield will be unstable after receiving damage from the chaos guardian
		# Default: 200 (10 seconds)
		I:"guardianCrystalUnstableWindow"=-99

		# Sets the guardians base health value (After you break through the guardians shield)
		# Default: 1000
		I:"guardianHealth"=-99

		# Sets the guardians shield capacity (You will need to break through this after disabling the guardian crystals)
		# Keep in mind there is no limit to how fast you can hit the guardians shield so this will melt with a high damage rapid fire bow.
		# Default: 16000
		I:"guardianShield"=-99

		# Allows chaotic weapons to destabilize the guardian crystal shields.
		# This makes it much easier to farm the guardian but only after you have chaos tier weapons.
		B:"chaoticBypassCrystalShield"=true

		# Number of chaos shards dropped by the chaos crystal when broken by a player
		I:"chaosDropCount"=5
	}

	# These are all config fields related to the Stabilized Spawner and mob souls
	"Stabilized Spawner" {
		# Mobs have a 1 in {this number} chance to drop a soul when killed with the Reaper enchantment.  Note: This is the base value; higher enchantment levels increase this chance.
		I:"soulDropChance"=1000

		# Passive (Animals) Mobs have a 1 in {this number} chance to drop a soul when killed with the Reaper enchantment.  Note: This is the base value; higher enchantment levels increase this chance.
		I:"passiveSoulDropChance"=800

		# By default, any entities added to this list will not drop their souls and will not be spawnable by the Stabilized Spawner.
		S:"spawnerList" <
		>

		# Changes the spawner list to a whitelist instead of a blacklist.
		B:"spawnerListWhiteList"=false

		# Enabling this allows boss souls to drop. Use with caution!
		B:"allowBossSouls"=false

		# Sets the min and max spawn delay in ticks for each spawner tier. Order is as follows.\nBasic MIN, MAX, Wyvern MIN, MAX, Draconic MIN, MAX, Chaotic MIN MAX
		I:"spawnerDelays" <
			200
			800
			100
			400
			50
			200
			25
			100
		>
	}

	# Sets the maximum fuel that can be added to an Advanced Dislocator.
	I:"dislocatorMaxFuel"=1024

	# Sets maximum area (in blocks) for a DE portal, The default value 65536 is equivalent to a 256x256 portal
	I:"portalMaxArea"=65536

	# This is more for sanity than actually limiting portal size. Sets the max distance a portal block can be from the receptacle
	I:"portalMaxDistance"=256

	# These are all (server side) config fields related to the reactor
	"Reactor" {
		# Adjusts the energy output multiplier of the reactor.
		D:"reactorOutputMultiplier"=1.0

		# Adjusts the fuel usage multiplier of the reactor.
		D:"reactorFuelUsageMultiplier"=1.0

		# Allows you to adjust the overall scale of the reactor explosion. Use \"disableLargeReactorBoom\" to disable explosion completely.
		D:"reactorExplosionScale"=1.0

		# If true, this will disable the massive reactor explosion and replace it with a much smaller one.
		B:"disableLargeReactorBoom"=false
	}

	# This can be used to adjust the amount of Draconium Dust the Ender Dragon drops when killed.
	# The amount dropped will be this number +/- 10%
	I:"dragonDustLootModifier"=64

	# By default, the dragon egg only ever spawns once. This forces it to spawn every time the dragon is killed.
	B:"dragonEggSpawnOverride"=true
}

# These are client side config properties.
"Client" {
	# Set this to false to disable the fancy 3D tool models. (Requires restart)
	B:"fancyToolModels"=true

	# Set this to false to disable tool shaders.
	B:"toolShaders"=true

	# Set this to false to disable crystal shaders.
	B:"crystalShaders"=true

	# Set this to false to disable reactor shaders.
	B:"reactorShaders"=true

	# Set this to false to disable chaos guardian shaders. (May visually break some stuff but could be useful if you are experiencing gl crashes.)
	B:"guardianShaders"=true

	# Set this to false to disable all other shaders.
	B:"otherShaders"=true

	# These settings is accessible in game via the "Configure Equipment" gui.
	"itemConfigGUI" {
		# Setting this to false will prevent properties from being displayed if their associated item is not in your inventory.
		B:"showUnavailable"=true

		# Setting this to false will disable property window snapping.
		B:"enableSnapping"=true

		# Setting this to false will disable the highlight/animation that occurs over a properties associated item when hovering over or editing a property.
		B:"enableVisualization"=true

		# Setting this to false will hide the "Add Group" button.
		B:"enableAddGroupButton"=true

		# Setting this to false will hide the "Delete Zone"
		B:"enableDeleteZone"=true

		# If enabled your configured properties, property groups and presets will still be accessible when in the simple configuration mode.
		B:"enableAdvancedXOver"=false
	}

	# Enable / Disable item dislocator pickup sound
	B:"itemDislocatorSound"=true
}

# These settings allow you to override the base stats for DE's equipment.
# Please note the generated default values "-99" is actually a marker that tells DE to use the actual internal default value.
# This value is listed in each properties description but may not be valid if this config was generated by a previous version of DE.
"Equipment" {
	# Internal Default Value: 10.0
	D:"draconiumEfficiency"=-99.0

	# Internal Default Value: 15.0
	D:"wyvernEfficiency"=-99.0

	# Internal Default Value: 25.0
	D:"draconicEfficiency"=-99.0

	# Internal Default Value: 50.0
	D:"chaoticEfficiency"=-99.0

	# Base Attack Damage
	# Internal Default Value: 1.125
	D:"draconiumDamage"=-99.0

	# Base Attack Damage
	# Internal Default Value: 1.25
	D:"wyvernDamage"=-99.0

	# Base Attack Damage
	# Internal Default Value: 1.75
	D:"draconicDamage"=-99.0

	# Base Attack Damage
	# Internal Default Value: 2.5
	D:"chaoticDamage"=-99.0

	# Base Attack Speed (How many times you can attack at full power per second)
	# Internal Default Value: 1.125
	D:"draconiumSpeed"=-99.0

	# Base Attack Speed (How many times you can attack at full power per second)
	# Internal Default Value: 1.25
	D:"wyvernSpeed"=-99.0

	# Base Attack Speed (How many times you can attack at full power per second)
	# Internal Default Value: 1.5
	D:"draconicSpeed"=-99.0

	# Base Attack Speed (How many times you can attack at full power per second)
	# Internal Default Value: 2.0
	D:"chaoticSpeed"=-99.0

	# Internal Default Value: 12
	I:"draconiumEnchantability"=-99

	# Internal Default Value: 15
	I:"wyvernEnchantability"=-99

	# Internal Default Value: 25
	I:"draconicEnchantability"=-99

	# Internal Default Value: 35
	I:"chaoticEnchantability"=-99

	# This is a multiplier that is applied to the base attack damage
	# Internal Default Value: 9.0
	D:"staffDamageMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack damage
	# Internal Default Value: 7.0
	D:"swordDamageMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack damage
	# Internal Default Value: 9.0
	D:"axeDamageMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack damage
	# Internal Default Value: 5.0
	D:"pickaxeDamageMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack damage
	# Internal Default Value: 5.5
	D:"shovelDamageMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack damage
	# Internal Default Value: 1.0
	D:"hoeDamageMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack speed
	# Internal Default Value: 0.5
	D:"staffSpeedMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack speed
	# Internal Default Value: 1.6
	D:"swordSpeedMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack speed
	# Internal Default Value: 1.0
	D:"axeSpeedMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack speed
	# Internal Default Value: 1.2
	D:"pickaxeSpeedMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack speed
	# Internal Default Value: 1.0
	D:"shovelSpeedMultiplier"=-99.0

	# This is a multiplier that is applied to the base attack speed
	# Internal Default Value: 4.0
	D:"hoeSpeedMultiplier"=-99.0

	# This is an efficiency multiplier specifically for the staff of power.
	# The staff gets its own multiplier because its a "special tool"
	# Internal Default Value: 3.0
	D:"staffEfficiencyMultiplier"=-99.0

	# This is the base energy value for each tier before the type multiplier is applied.
	# Internal Default Value: 0
	L:"draconiumBaseEnergy"=-99

	# This is the base energy value for each tier before the type multiplier is applied.
	# Internal Default Value: 0
	L:"wyvernBaseEnergy"=-99

	# This is the base energy value for each tier before the type multiplier is applied.
	# Internal Default Value: 0
	L:"draconicBaseEnergy"=-99

	# This is the base energy value for each tier before the type multiplier is applied.
	# Internal Default Value: 0
	L:"chaoticBaseEnergy"=-99

	# This is a multiplier that is applied to the base energy value.
	# Internal Default Value: 3.0
	D:"staffEnergyMult"=-99.0

	# This is a multiplier that is applied to the base energy value.
	# Internal Default Value: 1.0
	D:"toolEnergyMult"=-99.0

	# This is a multiplier that is applied to the base energy value.
	# Internal Default Value: 8.0
	D:"capacitorEnergyMult"=-99.0

	# This is a multiplier that is applied to the base energy value.
	# Internal Default Value: 2.0
	D:"chestpieceEnergyMult"=-99.0

	# This is the per block energy requirement of all mining tools.
	# Internal Default Value: 256
	I:"energyHarvest"=-99

	# This is the energy requirement for weapons. This is multiplied by the weapons attack damage.
	# Internal Default Value: 1024
	I:"energyAttack"=-99

	# Shield recharge base energy per shield point.
	# Internal Default Value: 8192
	I:"energyShieldChg"=-99

	# This controls the shield's passive power usage. The formula is: passiveDraw = (shieldPoints^2 * shieldPassiveModifier) OP/t
	# Internal Default Value: 5.0E-4
	D:"shieldPassiveModifier"=-99.0

	# Elytra flight energy use per tick.
	# Internal Default Value: 1024
	I:"elytraFlightEnergy"=-99

	# Creative flight energy use per tick.
	# Internal Default Value: 4096
	I:"creativeFlightEnergy"=-99

	# Elytra boost energy per tick, Internal Default Value: 1024
	I:"elytraWyvernEnergy"=-99

	# Elytra boost energy per tick, Internal Default Value: 2048
	I:"elytraDraconicEnergy"=-99

	# Elytra boost energy per tick, Internal Default Value: 8192
	I:"elytraChaoticEnergy"=-99

	# Bow base energy per calculated damage point, per shot, Internal Default Value: 1024
	I:"bowBaseEnergy"=-99
}

# These settings allow you to override the base module grid sizes for DE's modular items.
# The format is:
# 	I:"configTag" <
# 		width
# 		height
# 	>
# Leave blank to use the internal default value.
# This value is listed in each properties description but may not be valid if this config was generated by a previous version of DE.
# Please note reducing grid size will not remove modules from existing items but will instead leave modules in an invalid state where they are
# still fully functional but installed outside of the grid bounds.
"Module Grids" {
	# (read category description)
	# Setting this to true will cause invalid modules to be deleted from the module grid.
	B:"removeInvalidModules"=false

	# Internal Default Value: 4 x 4
	I:"wyvernTools" <
	>

	# Internal Default Value: 6 x 5
	I:"draconicTools" <
	>

	# Internal Default Value: 8 x 6
	I:"chaoticTools" <
	>

	# Internal Default Value: 8 x 6
	I:"draconicStaff" <
	>

	# Internal Default Value: 10 x 8
	I:"chaoticStaff" <
	>

	# Internal Default Value: 6 x 5
	I:"wyvernChestpiece" <
	>

	# Internal Default Value: 8 x 6
	I:"draconicChestpiece" <
	>

	# Internal Default Value: 10 x 8
	I:"chaoticChestpiece" <
	>

	# Internal Default Value: 4 x 4
	I:"wyvernCapacitor" <
	>

	# Internal Default Value: 5 x 5
	I:"draconicCapacitor" <
	>

	# Internal Default Value: 8 x 6
	I:"chaoticCapacitor" <
	>
}
